This tape is made with super thin conductive non-woven carbon scrim and double-sided conductive glue. Providing XYZ-Axis, isotropic electrical conductivity. The potential application would be for many kinds of EMI/EMC/RFI shields or gaskets attaching, grounding.
Or for bonding or stabilizing conductive fabric before sewing, and more. Some use this tape as 3M 9707. (Please try our small samples to see if it fits your need).Resistance : non-standard test 25O, standard test 0.030.05O. Approximate Thickness : 2.6 mil.
Adhesive Type : electrically conductive acrylic. It's available in three sizes. 1cm x 18 M approx. 5cm x 18 M approx. 10cm x 18 M approx.
And it's also available in Sheets. Relatively faster then EMS, higher availability for most region for most of the time. This is considered as special ordered item, the return will NOT be accepted. Please test with our small sample sheets in advance. All testing results are for reference only, the result may differ when testing in different conditions.Attaching a 5x50mm strip EC 326 in S shape configuration direct onto the. Metal rod, attaching area approx. 5x5mm on each side, apply pressure to attaching area for 30s, release pressure and wait for stable for 30s, then measure the max resistance for 30s with FLUKE multimeter. According to factory testing report, which fellow the ASTM-257 standard, test with a 25x25mm aluminum testing foil made by PSTC-1 method, and measure with ohmmeter. Tolerance: width ±2mm, length ±5%. Please note the Post Office may not issue the compensation instantly, and it may take some time to apply. Some region may not apply. ° Not apply for some services.
This item is in the category "Consumer Electronics\Other Consumer Electronics". The seller is "bk_supply_us" and is located in this country: TW. This item can be shipped worldwide.